Pin Connections                    Data is made available to the Driver Information Panel
       24 way Connector                   from  Source points on  the Cluster Main board.
                                                       In actual performance  the DIC Panel serves as a
                                                       switching network to change the logic level from a hi
                                                       level to a low level and cause this change in status to
                                                       be relayed back to the MPU and then presents the
                                                       present status of that function to be displayed on the
                                                       center gauges panel.
                                                        For example.... Connecting a jumper cable from
                                                        Pin A8 (Battery)to Pin B1(Panel Ground) will
                                                        cause the Battery voltage to read out on the center
                                                        panel. All listed functions could be seen in this manner.
 
 
 
 

Open Mon. thru Fri 9 am - 5 pm.

Taber Corvette Parts
421 Outer South State St
Chandler, IN 47610
Phone 1 877 349 2838

Check or Money Order    Visa / Mastercard